Smart Lights

Superior, switch-over 4 segment illumination. Fully programable via USB interface. For demanding, shiny and/or curved objects and surfaces.

Data sheet
(order numbers etc.)
2D drawings
(SL-30, SL-70, ...)
3D drawings
(SL-30, SL-70, ...)
Documentation
(guides, wiring)
  • Switch-over 4 segment illumination
  • Programmable via USB interface
  • Might act as an one segment
    homogenous low-angle rigng light
  • Robust construction

Basic electric parameters

Model Voltage Span Nominal Voltage Nominal Current Single segment current Input Trigger Voltage Trigger Current Analog light intensity regulation PWM light intensity regulation Segment Input Voltage Segment input current
SL-120W|R|G|B 7-28 V 24 V 625 mA 625 mA 15 W 10-24 V 2.3 mA 2.7-10 V 10-24 V 12-24 V 4 mA
SL-70W|R|G|B 7-28 V 24 V 350 mA 390 mA 8.4 W 10-24 V 2.3 mA 2.7-10 V 10-24 V 12-24 V 4 mA
SL-30W|R|G|B 7-28 V 24 V 200 mA 220 mA 4.8 W 10-24 V 2.3 mA 2.7-10 V 10-24 V 12-24 V 4 mA

Dimensions and weights

model a outer Ø (mm) b inner Ø (mm) c height (mm) active lighting area weight
SL-120... 172 120 27.5 Ø mm 370 g 
SL-70... 118 70 28 Ø mm 180 g 
SL-30... 72 30 23.3 Ø mm 105 g 

Controller CM-01

Terminal box output “OUT LIGHT T” – Light connection

Terminal +24 V: light positive pole
Terminal PWM: PWM signal
Terminal 0 V: light negative pole

Terminal box input “IN LIGHT T” – Power supply and control signal connection

Terminal +24 V: positive pole of 24 V DC Power Supply
Terminal 0 V: negative pole of 24 V DC Power Supply
Terminal TRIG: Trigger signal from camera, PLC, etc.

Controller cm-01 Controller cm-01 schema